จำหน่าย ตู้ควบคุมระบบแจ้งเตือนดหตุเพลิงไหม้ ขนาด 40 โซน รุ่น CL-9600 ยี่ห้อ CL ในราคาปลีก-ส่ง ติดต่อ บริษัท ไฮไฟร์โพรเทคชั่น แอนด์ ซีเคียวริตี้ จำกัด สายด้วน 02-125-7009 ขายส่งอุปกรณ์ ไฟอลาม ทุกชนิด
Fire Alarm Control Panel Model CL-9600-40 |
สั่งซื้อสินค้าหรือขอใบเสนอราคา สายด่วน 02-125-7009 Line ID: @hifire หรือ E-mail: hifire.protect@gmail.com |
CL-9600 / 50 Zone / 4A 24VDC +Graphic 40 Zone (CLP-013/8ea) 8,000 บาท +Graphic 40 Zone และ AUX Relay 40 Zone (CLP-012B/8ea) 19,200 บาท, +1 Timer 1,600 บาท, +1 Telephone Handset 1,200 บาท |
Electrical Feature * Type :CL9600 Type P1 * Standard : CNS 887 Z2044 * Regular source : AC220V (50/60Hz) * Resereve sonrce : DC24V close type, maintenance-free lead acid battery. * Circuit voltage : Regular DC24V, Allowance DC19V-DC30V * End resisrance : 10K ohm 1/4 1/W installed on the extreme and of the detetor * Exterior resisrance : Below 50 ohms after circuit action (When exterior line short circuit) * Detector : Smoke deteting type, differential type, constant temperatur e type. * Main unit buzzing : Built-in buzzer DC24V 90dB (on and off type) * Consollidated plate : Within 30V30W maximum connections(fire circuit indicating lamp number X 1.3) pieces. * Consollidated plate : Within 24V 100mA maximum connections (circuit rings number X 1.3) pieces * Consollidated plate : To be used with area circuits or an independent circuit. pressing lock * Water alarm : Point and line connecting by pump starter (No voltage A point Connecting) * Point connecting : (No voltage A point connceting) AC220V 5A (550VA) * Telephne set : Two telephone receivers to each switchborad. * Appearance : Steel plate 1.6 M/M color : lvory (baking finish) * Spares : End resistance. fuses and line chart as required num of circuit |
Switch Operation : Up-setting Down-close * Circuit test : Test one by one of the switches of the face board for fire warning and breaker circuit. * Bettery test : Test the battery.charging may by tested by basic board (charging lamp)during reverting. * Fire test : lf not set,test the fire circuit one by one by the switches on the face board. * Breaker test : lf not set,test the breaker citcuit one by one by the switches on the face board. * Breaker sound : If circuit breaking,the breaking buzzer sound may be controlled * Main unit sound : If circuit on fire,the mian unit fire sound may be controlled. * Area sound : When fire action,the combined plate area bell may be controlled * Emergency alarm : Press on to star main unit sound and combined area bell directly. * Potential switch : When setting,detecting error may be controlled by CPU automatically and circuit error eliminated. * Transmitting switch : When fire action,pump starting plate or transmitting NO or NC point may be controlled. * Fire reversion : When press on.fire action may be released and fire main unit may be reverted to supervising state. * Telephone : When calling in,please take the telephone to start talking. |
|
